How to Lay Synthetic Turf on Dirt

A Comprehensive Guide to Installing Rubber Mulch's Synthetic Turf 15' x 100'

The aesthetic appeal and practical benefits of synthetic turf have boosted its popularity over the last few years. Its constant lush green appearance, coupled with minimal maintenance requirements, make it a favored choice for both residential yards and commercial landscapes. In this comprehensive guide, we will walk you through how to lay synthetic turf on dirt, focusing on the Synthetic Turf 15' x 100' from Rubber Mulch.

What You'll Need

Before embarking on your turf laying project, gather the necessary tools and materials. Here's your checklist:

• Synthetic Turf 15' x 100' from Rubber Mulch
• Tape measure
• Shovel
• Rake
• Landscape fabric
• Crushed stone or gravel
• Plate compactor (can be rented at home improvement stores)
• Border material (like timber or concrete curb)
• Weed killer
• Utility knife
• Sand
• Broom

Step-by-Step Guide

Step 1: Measure Your Space

Initiate the project by accurately measuring the area where you plan to lay your synthetic turf. This measurement will help you estimate how much Synthetic Turf 15' x 100' from Rubber Mulch you'll require. Overestimating is better than underestimating in this case, as it's always more efficient to cut down the turf than to patch up insufficient pieces.

Step 2: Clear and Prepare the Area

Once your measurements are in place, clear the intended turf area with a shovel. Remove grass, plants, stones, or any other organic materials present. After clearing, spray the area with a robust weed killer to deter any potential growth that might disrupt your turf.

Step 3: Install Your Border

Next, install a solid border around the area's perimeter. This is an essential step because the border will contain the base materials (crushed stone) and the synthetic turf, ensuring they stay in place.

Step 4: Lay the Base Material

With the border installed, it's time to lay the base material. Cover the cleared area with crushed stone or gravel. This layer serves a dual purpose. First, it facilitates proper drainage, and second, it creates a firm and even base for your synthetic turf. Aim for a depth of about 3 to 4 inches.

Step 5: Compact the Base Material

Now, compact the base material using a plate compactor. This tool helps to create a level and stable surface for your synthetic turf, which is crucial for the turf's appearance and longevity.

Step 6: Install the Landscape Fabric

Post-compaction, lay down a layer of landscape fabric over the compacted base. The fabric acts as a barrier, inhibiting the growth of weeds that could potentially push through your synthetic turf.

Step 7: Roll Out the Synthetic Turf

Now comes the exciting part - rolling out your Synthetic Turf 15' x 100' from Rubber Mulch. Carefully cut the turf to fit your space using a utility knife. Ensure that the grass blades all face the same direction to give your turf a natural and uniform look.

Step 8: Secure the Turf

Secure the synthetic turf in place by using landscaping staples or U-nails. Pay special attention to the edges but don't ignore the center. Staples or nails in the center will help prevent the turf from shifting or wrinkling over time.

Step 9: Add and Brush the Sand Infill

The final step involves spreading a layer of sand over the synthetic turf. The sand helps the grass blades to stand upright, giving the turf a natural look, and adds weight to the turf ensuring it stays in place even under windy conditions or high foot traffic.

Start by evenly spreading the sand over the surface of the turf. Aim for about 1 to 2 pounds of sand per square foot of turf, although this can vary depending on the specific turf product and the conditions in your area.

After you've spread the sand, use a stiff-bristled broom to brush the sand down into the base of the turf. This will help the grass blades stand up and will distribute the sand evenly throughout the turf. It's a good idea to brush in multiple directions to ensure the most even distribution.

Post-Installation Tips

Once you've completed the installation of your Synthetic Turf 15' x 100' from Rubber Mulch, there are a few post-installation tips to keep your turf looking its best:

1. Periodic Rinsing: Rinse your turf occasionally to remove dust, dirt, and pollen. A garden hose will work fine for this.
2. Brush Regularly: To keep the blades upright and maintain the plush look of your turf, brush it regularly with a broom, especially in high-traffic areas.
3. Attend to Spills Promptly: If there are any spills, clean them up promptly. Most spills can be rinsed away with water. For tougher stains, use a mild soap with warm water or a vinegar and water solution.
4. Avoid Heavy Items: Try not to place heavy items on the turf for extended periods as it can cause the blades to flatten and can potentially damage the backing of the turf.

Installing synthetic turf can be a rewarding DIY project that can transform any dirt space into a lush, green, and aesthetically pleasing area. With the Synthetic Turf 15' x 100' from Rubber Mulch, you are guaranteed a product that not only looks great but is durable and long-lasting. Remember, the key to a successful installation lies in thorough preparation, careful execution, and regular maintenance. Enjoy your new, beautiful, synthetic turf lawn.

Also in Rubber Mulch Blog